Clicked 123 times today!Save 15% 🔥 Almost Sold Out! Order Now! 🔥
Why we love it
Capture stunning footage with this camera cage, perfect for photographers and videographers who demand high-quality and durable equipment. With its custom-built design and quick-release plate, you can easily attach and detach your camera. The cage's multiple mounting options and adjustable design make it easy to customize and adjust the settings, while its durable construction ensures that your camera is protected and secure.
Improved design: 1. A cold shoe has been added to the upper right corner of the cage to facilitate the installation of accessories such as microphone 3468 and LED video light 3286; 2. At the bottom, two 1/4"-20 threaded holes with a distance of 18 mm are added, which are compatible with the SMALLRIG quick release plate for Arca 3154. A QD hole is added at the bottom, which is compatible with the QD quick release shoulder straps and other accessories.
For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SMALLRIG Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shooting and protect the camera while offering a wide range of accessory holders. NOTE: The HDMI cable clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV as it blocks the synchro port interface when used with Alpha 7R V.
Multiple attachment points: the cage has several 1/4 inch - 20 holes and 3/8 inch - 16 positioning holes for ARRI, which can attach accessories such as the top handle 3765, the side handle 2093 and the monitor stand 2903B. There are 2 built-in cold shoe interfaces that can install microphones, fill lights and other devices; the QD hole on the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and at the bottom of the cage, around the wrist strap PAC2456
Three-point locking: a positioning pin is added to the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point lock to make the camera stable. Adjust the direction of left locking slider to adjust to different models, side [A7 IV] suitable for Alpha 7 IV and Alpha 7R V, side [A7S III/A1] suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV
All-round protection: built-in all-round rubber seal to prevent scratches. When the cage is installed, the camera interface, dials, buttons and battery change are not affected. The design of the opening and closing key is added to the position of the battery compartment, which better adapts to the roundness of the fuselage, solves the problem of placing the little finger and improving the grip of the fuselage.
Precaution - 1. Removing the split ring on the left side before using the side locking plate. 2. Please note that the camera strap eyelet is occupied when using the side locking plate. 3. HDMI Cable Clamp 3000 is not compatible with Alpha 1
Take your camera game to the next level with this SMALLRIG Mini Side Handle. Its compact design, adjustable positioning, and multiple mounting options make it perfect for handheld shooting and camera stability. Its lightweight construction, ergonomic design, and built-in cold shoe ensure a comfortable and convenient shooting experience.
Auxiliary Camera Movement: The mini side handle is designed to assist camera movement, enhance the stability during handheld mobile shooting. Note: The camera cage handle needs to be installed to two 1/4"-20 threaded holes with a spacing of 18mm.
Small and Portable: With dimensions of 102 x 80 x 46mm and a weight of only 116g, the camera handle is lightweight and portable, but it can bear a load of 5kg. NOTE: If you prefer/need a larger handle, please choose other SMALLRIG side handles, such as SMALLRIG 4015 and SMALLRIG 4017.
Interchangeable for Left and Right Hands: The camera cage mini side handle adopts ergonomic design, which can be used interchangeably with left and right hands without re-disassembling the handle connector, providing a comfortable and convenient shooting experience.
Adjustable Up and Down: The camera handle can be adjusted up and down by 30mm, and adjusted to the best grip position according to the size of the camera body. The bottom has a built-in magnetic hexagonal wrench for easy adjustment of the handle connector.
Multiple Mounting Points: The camera cage handle has built-in a 1/4"-20 threaded hole to attach accessories such as Monitor Support 2905B and Magic Arm 3875; A cold shoe is built-in to attach LED Video Light 3286B, Microphone 3468, etc., to meet the expansion needs of multiple scenes.
Unleash your creativity with this comprehensive vlogging kit, featuring a phone cage and accessories for enhanced shooting capabilities. Compatible with a wide range of smartphones, this kit includes a portable LED light, high-quality microphone, and tripod for smooth and stable footage.
Note: for iPhone, for Samsung phone, the donated adapter will be incompatible, please use the original adapter.
Whole Solution for Vlogging SmallRig Professional Phone Video Rig Kit 3384B is specially designed for vlogging and live streaming, and supports both handheld shooting and tripod shooting. The kit includes a universal phone cage 2791, two side handles 2772, a desktop tripod BUT2664, a mini LED light 3286, a microphone 3288, a power bank holder 2790, a cold shoe mount 1241, two cables,etc.
Wide Application The phone cage is compatible with phones with a width range from 62mm to 86mm. Suitable for most smartphones, such as for iPhone 16 / 15 / 14 / 13 / 12 Pro / Pro Max, for Samsung Galaxy S24 / S23 / S22 Ultra, for Pixel 8/7/6/5 series, for Huawei Mate 60/50/40/P Series, and so on.
With Portable LED Light Video LED Light is a lightweight, portable and stylish mini-LED light, with 0-100% brightness control, CRI95, and color temperature scale from 2700K to 6500K. The light comes with a built-in 2200mAh lithium-ion battery, which is charged via the included USB Type-C charging cable and features a 105-minute operating time (maximum brightness).
With High-quality Microphone The shotgun microphone has a cardioid pattern that reduces background noise and captures clear directional sound. It comes with a foam windshield and smartphone/ camera cables.
Expand Your Possibilities The phone cage kit has multiple 1/4”-20 thread holes and cold shoe mounts for more mounting options. Mix and match accessories to create your perfect setup.
Ideal for photographers and videographers who need a versatile and durable top handle for their camera rig. The SmallRig top handle features a built-in shoe mount, multiple mounting points, and compatibility with various cages. It's designed for handheld shooting and can be easily attached to a camera cage.
TOP HANDLE This SmallRig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease.
MOUNTING POINTS The SmallRig camera handle with abundance of 1/4'' and 3/8'' mounting points, can attach different gears on it for additional attachment options and DIY operations, such as monitor mount 2905, magic arm 2065, wireless remote control 2924, shotgun microphone 3468, led light 3286
COMPATIBLITY This SmallRig camera handle grip can be attached to a camera cage directly with 2pcs 1/4” screws ( the adjustable space between two 1/4 inch screws is 30mm-40mm), Fits any cage with the standard 1/4”- 20 thread on top, such as SmallRig cage 2087, cage 2168, cage 3667, cage 1661 and most cages of SmallRig.
EXQUISITE DESIGN The versatile handle is made by aluminium alloy, this material is light, durable, is very sturdy and solid, you will feel very safe carrying the rig around with this solid and light handle stabilizer rig.
SATISFACTION WARRANTY All SmallRig camera rigs come with a YEAR warranty, any problem after purchasing please contact us, we will try our best to help you within 24 hours.
Protect and enhance your camera with the SMALLRIG Black Mamba Camera Cage for Canon EOS R6 Mark II. Featuring a streamlined design, built-in quick release plate, and multiple mounting options, this cage is perfect for filmmakers and photographers seeking a secure and versatile camera accessory. Its lightweight construction and durable materials make it ideal for everyday use.
Streamlined Design： SmallRig Camera Cage 4161 adopts a streamlined design, providing comprehensive protection for your camera while expanding multiple accessory interfaces. The buttons on the top of the camera are completely avoided and all buttons are accessible. And it is lightweight, only 158g/0.34lbs
Built-in Quick Release Plate: Built-in bottom plate for Arca-Swiss, is compatible with RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizer for DJI and Tripod for Arca, which allows for quick switching between handheld, video tripod, and stabilizer providing versatility for video shooting in various scenes
Anti-Twisting: The extension frame of the cage is securely locked with 1/4"-20 screws at the bottom and positioning blocks on both sides, preventing any twisting and ensuring a stable shooting experience. Built-in many silicone pads are also included to protect your camera from scratches
Multiple Mounting Options: The cage features built-in 1/4"-20 and 3/8"-16 threaded holes, as well as a locating hole for ARRI, allowing you to attach various accessories such as top handles 3765 2165C, side handles 4016, and monitor mount 2903B. The built-in cold shoe allows you to attach microphones, LED video lights, and other accessories
Easy & Convenient: Built-in wrench for easy mounting and release. The bottom QD socket is compatible with SmallRig hand band PAC2456, shoulder PSC2428, etc
Ideal for filmmakers and photographers who want a high-quality camera cage. This SMALLRIG M50 / M50 II / M5 Cage features multiple accessory mounts, ergonomic design, and unobstructed button access, making it perfect for enhancing filming capabilities.
For Canon M50 / M50 Mark II / M5 Camera : SMALLRIG Camera Cage for Canon M50 / M50 II / M5 camera 2168C is designed to provide accessory mounting points and fit protection for the fuselage, enhancing the experience of grip for the fuselage.
Multiple Mount Points : The cage incorporates a cold shoe, 1/4" and 3/8" threaded holes for attaching more accessories. Such as LED lights, microphones, and monitors etc. NATO rails and positioning holes for ARRI on the side for the handle or other accessories. 1/4" threaded holes on the side of the cage can be used to attach SMALLRIG Side Handle 2093/2425/2916
Ergonomic and Durable Design : The cage is equipped with an ergonomic, compact, and practical handle. The recessed arc-shaped design of the index finger grip makes it more comfortable to hold. It is made of ultra-strong and lightweight aluminum alloy, resistant to oxidation and scratches.
No Obstrycted Buttons :Fitted design with super CNC cutting technology will not block wifi transfer button, hot shoe, control buttons, HDMI/SDI slot and battery compartment.
Quick Switch : The integrated plate for Arca on the bottom makes the cage convenient to mount directly on the clamps for Arca. It, therefore, allows for quick attachment and release and allows you to go from tripod to handheld shooting in seconds. The cage also has 1/4" and 3/8" threaded holes on the bottom for various tripods or monopods.
Ideal for professionals and individuals who need a high-quality camera cage. This camera cage kit features a sturdy design, adjustable handles, and multiple attachment points, making it perfect for use with Sony Alpha series cameras. With its ergonomic design and durable construction, it's ideal for extended shooting sessions and provides all-around protection for the camera.
For Alpha 7R V/ Alpha 7 IV/Alpha 7S III: SmallRig Cage Kit 3669 includes a cage, HDMI cable clamp, top handle and side handle. It is designed to reduce arm strain and increase stability when handshooting, while offering a wide range of accessory mounts. It is designed for Sony Alpha 7R V, Alpha 7 IV and Alpha 7 S III
Two-point lock: attach the camera to the cage with an integrated 1/4"-20 screw and use the two side locking plates (one for Sony Alpha7S III, one for Alpha 7 IV / 7R V), to prevent twisting. Please first remove the split ring on the left side of the camera. Please note that the camera strap eyelet when using the side lock.
All-round Protection:Adopted aviation aluminum and form-fitting design for safety and durability. The Alpha 7 IV cage has built-in protective pads that prevent the camera from being scratched. It retains access to the controls and hot shoe as well as the camera functions when the camera is mounted
Multiple attachment points: The cage has an integrated shoe holder, multiple 1/4"-20 threads and a 3/8"-16 mounting hole for ARRI. The cage also has a built-in NATO rail on the side and also features strap slots for a separately available neck or hand strap. A magnetic slotted screwdriver and Allen key are located on the bottom of the cage to secure the mounting screw
Top Handle & Side Hand Grip:Comes with a top handle for low angle shooting and a side handle for more stability. The side handle features a silicone insert for better grip and more stable shooting. The handle has 1/4"-20 threaded holes, 3/8"-16 mounting holes for ARRI, integrated cold shoes for attaching microphones, LED lights and monitors, etc.
HDMI Cable Clamp: The HDMI cable clamp, which is mounted on the left side of the cage with a 1/4"-20 screw and two fixing pins, prevents bending and fixes cables with a thumb screw to protect interfaces and ensure stable signal transmission. NOTE: This cable clamp is not compatible with Sony Alpha 1
Take your photography to the next level with the SMALLRIG A7 III/A7R III Camera Cage Kit. Designed for secure handheld shooting, this kit features a full cage, top handle, and numerous mounting points for accessories. Perfect for videographers, photographers, and content creators.
For Sony Alpha 7 III / Alpha 7R III SmallRig cage kit for Sony A7 III / A7R III 4198 is designed for handheld shooting and attaching other accessories. The cage locks the camera via one bottom 1/4"-20 screw and two side lock adapters, and the built-in rubber pads could protect your camera. Built-in quick-release plate for Arca at the bottom is convenient to switch between tripod and stabilizer shooting.
Multiple Mounting Points The kit has several built-in cold shoes can attach microphone 3468, LED video light 3286B, and monitor mount 2905B; multiple built-in 1/4"-20 threaded holes support the remote control side handle 3323; built-in 3/8"-16 locating holes for ARRI fits monitor mount 2903B. It also comes with a NATO rail on the left for side handle 3260. In addition, strap holes on both sides are compatible with hand strap PAC2456.
Top Handle for ARRI The top handle with 3/8"-16 locating holes for ARRI connects to the cage. The ergonomic design enhances the experience of grip for the fuselage. The top handle makes the cage kit easier to carry and facilitates low-angle shooting.
Clamp for HDMI Cable The HDMI cable clamp mounted onto the left side of the cage via two 1/4"-20 screws, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stable signal transmission.
Safe Installation The cage adopts three-point locking, which is stable and does not deflect. It comes with a built-in magnetic flat-head screwdriver & hex spanner for easy disassembly and assembly. Note: Please remove the side lock adapters before installing this cage.
Take your photography to the next level with this camera cage kit, designed for Sony Alpha 7R V/7 IV cameras. Featuring a secure two-point lock system, multiple accessory mounting options, and an ergonomic top handle, it's perfect for filmmakers and photographers who need a reliable and versatile camera rig for low-angle shots and protection against damage.
Compatibility: Cage Kit 3668 includes a cage, an HDMI cable clamp and a top handle. It is designed to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. It is designed for Sony Alpha 7R V/ Alpha 7 IV and Alpha 7 S III
Two-point locking: attach the camera to the A7 IV cage with a built-in 1/4"-20 screw, and use the two side locking plates (one for Sony Alpha7S III/Alpha 1, one for Alpha 7 IV/Alpha 7R V) to prevent twisting. To use the side security plate, please first remove the split ring on the left side of the camera. Please note that the camera strap eyelet is occupied when using the side safety plate
All-round protection: adopted aviation aluminum and form-fitting design for safety and durability. The Alpha 7 IV cage has built-in protective pads to prevent the camera from being scratched. It retains access to the controls and the hot shoe as well as the functions of the camera when the camera is mounted
Multiple attachment points: the cage features an integrated shoe holder, multiple 1/4"-20 threads and 3/8"-16 mounting holes for ARRI. The cage also has a built-in NATO rail on the side and also features strap slots for a separately available neck or hand strap. A magnetic slotted screwdriver and Allen key are located on the bottom of the cage to secure the fixing screw
Ergonomic Top Handle - The top handle feels comfortable and allows easy carrying and shooting at a low angle. It has 1/4"-20 threaded holes, 3/8"-16 positioning for ARRI holes, built-in cold shoes for mounting other accessories such as SmallRig monitor mount 2294
HDMI cable clamp: the HDMI cable clamp, which is mounted with a 1/4"-20 screw and two fixing pins on the left side of the cage, prevents bending and fixes cable with a thumb screw to protect interfaces and ensure stable signal transmission. Please note that this cable clip is not compatible with Sony Alpha 1
Capture stunning photos and videos with this professional LED video light, designed for macro photography and videography. Its high color rendering and adjustable brightness make it perfect for outdoor and indoor use, while its compact design and rainproof feature ensure it can withstand various environments. Whether you're a professional photographer or an enthusiast, this LED light is an excellent addition to your kit.
Professional Photo Light: SmallRig Led light kit 3405 features 5600K±200K, CRI95, and TLCI96. Featuring high-quality COB with high color rendering and uniform luminescence, the LED video light is perfect for professional photography, video, macro photography, cycling, camping, vlogging, and close-ups of an object.
Adjustable Brightness Levels: The portable light kit RM01 has four levels of brightness adjustment (short press: 25%-100%). The built-in 800mAh lithium battery supports about 1 hour of working time with 100% power output constantly and the maximum working time is 5 hours. Mini rechargeable video light with a Type-C port can extend the time.
Durable & Rainproof: The rainproof camera lighting kit uses PC+ABS materials which are heat resistant and weather resistant, stability and shock resistance, rainproof and dustproof, so it can be used for outdoor shooting in days of rain. [NOTE]: DO NOT submerge it underwater for an extended period of time.
Universal 1/4"-20 Screw Hole: The bottom of the cube video light has a 1/4"-20 screw hole for a variety of mounting options. The led light kit comes with shoe adapters, so it can be easily connected to a camera, tripod, and action camera.
Package Included:1 x Mini LED Light RM01, 1 x Charging Cable, 1 x Cold Shoe Head, 8 x Color Filters, 1 x Diffuser, 1 x Blaster, 1 x Honeycomb, 1 x Flap, 1 x Magnetic Frame, 1 x User Manual.
Designed for photographers and videographers, this SmallRig camera cage is a great way to protect and enhance your camera. With its durable design, multiple mounting points, and quick release plate, it's a great choice for anyone looking to upgrade their camera rig.
Dedicated Cage: SmallRig R7 Cage 4003 is a bionically designed, streamlined, and form-fitting aluminum cage that protects your camera body. It maintains full access to top controls of the camera.
Anti-Twist Design: The camera firmly mounts onto this cage with a 1/4"-20 screw. It incorporates an anti-twist design using two locking side plates, and has padding on the base to protect your camera from scratching.
Plentiful Mounting Points: SmallRig R7 Camera Cage features multiple 1/4"-20 threaded holes, 3/8" -16 locating hole for ARRI standard, cold shoe mount and NATO rail for various expansion so
Quick Switch Design: Built-in quick release plate for Arca at the bottom is compatible with RS 2 / RSC 2 / RS 3 / RS 3 Pro, enabling quick switch among handheld, stabilizer, and tripod shooting
Suggested Products: SmallRig Side Handle 2093 and 3814; Top Handle 3786 and 3765; Monitor Mount 3514 and 2905; Magic Arm 3515 and 2070; Holder for Portable Power Banks 2336; Rod Clamp 3598
Designed for Fujifilm XT5 camera users, this SMALLRIG X-T5 camera full cage provides an ergonomic grip and multiple accessory mounts for enhanced shooting experiences. The cage features a built-in QD port, NATO rails, and a quick release plate for easy installation and removal.
Customized X-T5 Cage: This camera multifunctional cage is form-fitting designed to protect your xt5 camera and not block the buttons, card slots, screen, and battery door. Please remove the split D-ring before installing this cage
Ergonomic Grip: The cage for Fuji X-T5 is equipped with ergonomically designed grip to improve the griping experience. Moreover, a complimentary shutter button is included for a better touch
Anti-Deflection Design: It locks the camera via one 1/4"-20 screw at the bottom and one M2 screw on both sides, and built in rubber pads preventing scratches and wiggles
Multiple Mounting Options: This camera cage provides various accessory mounts for use in different scenes, such as QD port for a quick-release QD shoulder buckle, 1/4"-20 threaded holes, 3/8"-16 threaded holes, 3/8"-16 locating holes for ARRI , NATO rails, cold shoe mount
Quick Switch: Buit-in swiss release plate for Arca at the bottom can quickly install your camera on RS 2 / RSC 2 / RS 3 / RS 3 Pro, enabling switch between gimbal, handheld and tripod shooting
Great for filmmakers and photographers who need a reliable and adjustable camera handle. This SMALLRIG mini side handle features a compact design and adjustable mounting points, making it compatible with a variety of cameras and cages. The ergonomic design and non-slip grip ensure a comfortable and secure hold.
FOR CAMERA CAGE SMALLRIG Mini Side Handle 2916 is designed for mirrorless, digital camera, and other small cameras cage. The handle can be mounted to the camera cages with two 1/4”-20 screws on the side.The spacing of two 1/4'' screws is 18mm
LEFT AND RIGHT SWITCH SMALLRIG Mini Side Handle 2916 re-combinable joint allows you switch from the left to right quickly; If you want to use it on the other side of the cage, just take off the connection part of handle and change the direction.
COMFORTABLE DESIGN SMALLRIG Mini Side Handle 2916 made of aluminum alloy and plastic（PC ABS） with ergonomic design, the portable handle provides filmmakers with smooth and comfortable shooting experience.
MOUNTING POINTS The SMALLRIG Mini Side Handle 2916 features 1/4'' threaded holes and strap eyelet for more accessories like the cold shoe 1241, and the wrist strap, such as 2456, can be mounted through the eyelet to prevent the camera from accidentally falling off.
UP AND DOWN ADJUSTABLE The SMALLRIG Mini Side Handle 2916 can be adjusted up and down based on your needs to fit different cage height.Note: The mini handle can bear a weight within 3.5KG
The SMALLRIG R5 R5 C R6 Cage is a durable and versatile camera accessory designed for Canon R5 and R6 cameras. With its ergonomic design, multiple mounting options, and quick release plate, it provides a secure and convenient way to attach accessories, such as microphones, lights, and handles, enhancing the overall camera experience.
Compact Camera Cage SmallRig 2982B provides protection for Canon R5 R6 R5 C camera with a wide range of accessories mounting points to make a convenient work of videography . It is secured to a camera via one 1/4"-20 screw and two locating pins with silicone cushions on the top and bottom to prevent scratches
Multiple Mounting Options Multiple 1/4"-20 and 3/8"-16 threaded holes for attaching such accessories as Side Handle 2093, Top Handle 1984 and Arm with Ball Heads 2070. The top comes with a cold shoe mount for microphones and LED lights. With 3/8"-16 locating holes for ARRI fit Top Handle 2165, Side Handle HSS2426 & 2914
Comfortable and Convenience Built-in spanner removes bottom screws and can be slid out from the side without interfering with the attachment of quick release plate. The right-hand side is designed to fit camera handle for the original and comfortable grip feeling
Multiple Functions Both sides and the bottom have strap holes , which works with Hand Strap PAC2456, Wrist Strap PSW2398 and Shoulder Strap PSC2428. Its left side supports Cable Clamp 2981
Built-in Quick Release Plate The cage’s bottom quick release plate for Arca and 1/4"-20 threaded holes allow connecting the original RS2/RSC2 plate for Arca , which can be mounted onto RS2/RSC2 quick release plate for Manfrotto and then onto stabilizer
Capture stunning footage with this camera cage, perfect for photographers and videographers who demand high-quality and durable equipment. With its custom-built design and quick-release plate, you can easily attach and detach your camera. The cage's multiple mounting options and adjustable design make it easy to customize and adjust the settings, while its durable construction ensures that your camera is protected and secure.
Rugged Full Cage: This cage is customized for Canon R6 Mark II, locking the camera via one 1/4"-20 screw at the bottom and one side lock adapter on both sides. It also maintains full access to the button, card slot, screen, and battery door.
Dual NATO Rails: R6 Mark II cage built-in NATO rails on the top and the left side to achieve quick switch NATO top handle (ID: 3766), monitor mount (ID: 2906B) and rotating NATO side handle (ID: 3847).
Stable Vertical Shooting: The cage is integrated with two 1/4"-20 threaded holes in the horizontal direction on the right side to prevent the camera from twisting when shooting vertically.
Quick Switch Design: Quick release plate for Arca at the bottom that supports tripod and RS 2 / RSC 2 / RS 3 / RS 3 Pro for quick switching between stabilizer, handheld, and tripod shooting.
Multiple Mounting Options: It features 1/4"-20 threaded holes, 3/8"-16 threaded holes, and 3/8"-16 locating holes for ARRI for top handle (ID: 3765) or monitor mount (ID: 2903), cold shoe to attach microphone, LED video light (ID:3405), strap holes for hand strap (ID: 3848), as well as a QD socket.
Designed for filmmakers and videographers, this camera cage provides a stable and secure platform for Canon EOS R5/R6 cameras. The improved design allows for easy access to controls and strap installation, and the multiple accessory mounting points make it versatile and convenient.
Improved Design: 1. Easier to press top buttons without block. 2. Easier to install the shoulder strap slots on both sides. 3. More compatibility: 1)A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories. 2) 1/4''-20 holes on the top with a pitch of 27mm, which is compatible with handle 1638C
Stable and Anti-deflection: Cage for EOS R5 R6 R5 C/ R6 Mark II is secured by one screw at the bottom and shoulder strap slots on both sides, making it stable and non-deflective, and features inside silicone cushions to protect the camera against scratches
Compatibility: SmallRig Cage 3464B is design for Canon for EOS R5 / R6 / R6 / R6 Mark II & BG-R10 Battery Grip, which protects the camera while facilitating videoing with its multiple accessory mounting points
Multiple Mounting Points: Comes with 1/4''-20 & 3/8''-16 threaded holes for attaching such accessories as a side handle 2093, top handle 1984 and magic arm with ball head 2070, one top 3/8" -16 locating hole for top handle 2165, and cold shoe that supports microphones and LED lights. The cage also fits the hand strap PAC2456, wrist strap PSW2398, and shoulder strap PSC2428
Integrated Swiss Plate for Arca: Integrated Swiss quick release plate for Arca works with RS2/ RSC 2/ RS3/ RS3 Pro and tripods. Built-in spanner at the bottom helps remove screws
Capture stunning footage with ease using this lightweight and ergonomic top handle, designed for DSLR camera cages and featuring multiple cold shoe mounts and threaded holes for accessories. The handle's silicone grip and 4-finger texture provide a comfortable and secure hold, while its aluminum alloy construction ensures durability and reliability. With its universal compatibility and easy-to-assemble design, this top handle is perfect for photographers and videographers on the go.
Comfortable Ergonomic Grip: The NATO top handle features a silicone part with a 4-finger texture, providing a more comfortable and anti-slip grip. It is designed for easy low-angle shooting and to reduce strain on the arms.
Wide Compatibility: Comes with a 50mm NATO Rail, allowing the top handle to be compatible with any camera cage featuring two 1/4" threaded holes. The handle can slide directly onto the NATO Rail and be secured with the built-in knob, making it easy toassemble and disassemble.
Lightweight and Solid: The handle w/ NATO Rail is made of aluminum alloy and features a hollowed-out design, which ensures that the handle weighs 144g (0.31lbs) while supporting a weight of up to up to 10kg (22lbs).
5 Built-in Cold Shoe Mounts: The front of the handle has 3 cold shoe mounts, while the back end has 2, allowing for connection of up to 5 external devices simultaneously, such as LED light, monitor, microphone, transmitter, and more.
12 Threaded Holes: Ten 1/4" threaded holes and two 3/8" threaded holes for arri could attach more accessories, such as monitor mount 2903B and magic arm 2066B.
Give your dog the gift of interactive play with this adorable green frog plush toy, designed for gentle play and squeaky fun. The durable corduroy construction and elastic texture make it perfect for small and medium dogs, while the cute design and squeaker sound ensure hours of entertainment and stimulation.
Streamlined Design: SmallRig R5 Mark II Camera Cage 4975 adopts a streamlined one-piece wrapping design, providing comprehensive protection for your camera, and ensures smooth control over the camera buttons for easy operation.
Anti-Twisting: The R5 Mark II cage is locked in place with 1/4"-20 screw at the bottom and positioning blocks on both sides(Please remove the positioning blocks on both sides of the expansion frame before installing the expansion frame), preventing any twisting and ensure a stable shooting experience. Built-in many silicone pads are also included to protect your camera from scratches.
Built-in Quick Release Plate: Built-in bottom plate for Arca-Swiss, allows direct mounting for Arca-Swiss tripod 4060 & 4353. It is compatible with RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers for DJI, and can quickly switch between stabilizer, handheld, and tripod scenes.
Multiple Mounting Options: The cage for Canon EOS R5 Mark II features built-in 1/4"-20 and 3/8"-16 threaded holes, for ARRI 3/8" -16 locating hole, QD interface, strap slot and other multi-specification interfaces, which can be combined with various expansion solutions. Features HawkLock cold shoe mount, HawkLock quick release plate for Arca-Swiss to improve work efficiency.
Sturdy Screen Protection: The filmmaking camera cage includes a scratch-resistant 9H tempered glass screen protector with IK03 impact resistance rating. Please notice the tempered glass screen protector is intentionally designed slightly smaller than the screen edges to prevent dust from entering through larger gaps, constituting a normal design feature.
